8
The current level is indicated by the number of
flashes made by the 70° 80
I
indicator light, that
alternates 5 seconds off with a number of flashes,
this for about 60 seconds.
Example:
1 flash
= level 1
2 flashes = level 2
3 flashes = level 3
4 flashes = level 4
5 flashes = level 5
3. To change the level, press the 70° 80
I
programme
push button. Each time the push button is pressed
the level changes.
Example:
If the current level is 3, pressing only one time the
70° 80
I
programme push button, level 4 is selected.
If the current level is 5, pressing only one time the
70° 80
I
programme push button, level 1 is selected.
The 70° 80
I
indicator light remains off for about 5
seconds after which starts flashing indicating the
new level selected.
4. To memorise the new level, switch off the
dishwasher by pressing the On/Off push button.
If your water is level 1 it is already soft and
therefore there is no need to use salt.
With the setting of the water softener at level
1 the salt indicator light on the control panel
will always remain off.
Use salt from level 2 upwards.
From level 2 upwards, if salt refilling is
necessary, the salt indicator light will
illuminate only in setting mode and at the
end of the washing programme.
During the run of the programme it will
remain off.
