26
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install
it under a close fitting sink unit or a pre-existing top,
providing the dimensions of the recess correspond
to those shown in the picture.
Proceed as follows:
-
Remove the machine’s worktop by unscrewing
the two front retaining screws, pull from the front
and slide out the rear slots, lifting the worktop.
Insert the machine after adjusting height and
levelling with the adjustable feet. When inserting the
machine, ensure that the water inlet and drain hoses
are not kinked or squashed.
Levelling
Good levelling is essential for correct closure and
sealing of the door.
When the appliance is correctly levelled, the door
will not catch on the levelling spacers on either side
of the cabinet.
If the door does not close correctly, loosen or tighten
the adjustable feet until the machine is perfectly
level.
820
570-600
450
IN04
