- 9 -
Technical specifications
Service and spare parts
Servicing and repairs must be carried out by a service
company authorized by the supplier. Use only spare parts
supplied by these.
Before calling service, use the trouble shooting list ”In the
event of a fault” to try to attend to the fault yourself. If ser-
vice is called in to remedy a problem that is in this list,
there is a risk that you will be responsible for the cost.
This is also true if you have used the appliance for a pur-
pose other than it is intended for.
Note that electrical faults should always be rectified by a
certified electrician.
Give the appliance’s model designation, product- and
serial numbers according to the data plate affixed to the
rear of the dishwasher.
You can record these details here:
TYPE.
............................................................
MOD.
............................................................
PROD.NO.
............................................................
SER.NO.
............................................................
Purchase date............................................................
Service
Installation instructions
Capacity:
5 place settings accordance EN 50242
Dimensions:
Height
460 mm
Width 450
mm
Depth
480 mm
Weight:
Net
17 kg
Water pressures:
Minimum
50 kPa (0,5 bar)
Maximum
1000 kPa (10 bar)
Water temperature:
Maximum
65° C
Electrical data:
Power supply
230 V - 50 Hz
Fuse
10 A
Heating element
1200 W
Power rating
1280 W
