34
Changing the opening direction
of doors
If you wish to change the opening side of the doors
proceed as follows:
1... Dismantle the vertical handles (in some models)
and assemble them in the opposite side. Cover the
holes with the plastic lids that were situated where
the handles are presently.
2... Remove the lower hinge taking care for the lower
door not to fall off. Using a 10mm spanner, unscrew
the hinge pin and reassemble it on the opposite
side.
3... Lift the lower door off the central hinge.
4... Remove the central hinge taking care for the upper
door not to fall off and not to lose the plastic was-
her.
5... Take the upper door off the upper hinge. Be care-
full not to lose the plastic washer.
6... Unscrew the plastic plugs located on the opposite
side of the central hinge and introduce them in the
holes occupied before by the hinge.
7…Unscrew the axle of the upper hing and screw it
into the hinge on the opposite side. Make sure to fit
in the metal washer for blocking.
8…Place upper door.
For the remaining parts proceed the other way
round.
Once finished make sure that all joints close
perfectly well all around the door and chek that the
internal light turns of when the fridge door closes.
