background image

Detergent tablets

Detergent tablets of different brands dissolve at different
speeds. For this reason some detergent tablets cannot
dissolve and develop their full cleaning power during short
programmes. Therefore please use long programmes when
using detergent tablets, to ensure the complete removal of
detergent residuals.
Do not place the tablets in the tub or in the cutlery basket
as this will result in poorer wash results. The tablets
should be placed in the detergent dispenser. 

Concentrated detergent

Based on their chemical composition, dishwasher detergents
can be split into two basic types:
- conventional, alkaline detergents with caustic components.
- low alkaline concentrated detergents with natural enzymes.
The use of 50°C washing programmes in conjunction with
concentrated detergents reduces pollution and is good for your
dishes; these wash programmes are specially matched to the
dirt-dissolving properties of the enzymes in the concentrated
detergent. For this reason 50°C wash programmes in which
concentrated detergents are used can achieve the same
results that can otherwise only be achieved using 65°C
programmes.

Combi detergents

If you are using dishwasher detergent that includes the rinse
aid function, this must be placed in the detergent compartment.

In this case the rinse aid dosage must be deactivated, in order
to avoid a double dosage.

Use of "3 in 1" combi detergents

General advice

These products are detergents with integrated and combined
detergent/rinse-aid and salt functions.

1.

Before using these products you should first check that the 

water hardness in your supply is compatible with the use of 

these products as per the detergent manufacturers (on the 
product packaging).

2. These products should be strictly used according to the 

detergent manufacturers instructions.

3. If you encounter problems when using 3 in 1 products for 

the first time then please contact the detergent 
manufacturers care line (the telephone number is given on 
the product packaging).

Special advice

When using combination 3 in 1 products select the lowest
possible setting for water hardness.

If you decide to turn back to the use of the standard detergent
system we advise that you:

Refill both the salt container and rinse aid dispenser.

Switch the water hardness setting to the highest possible 
position and run from 1 to 3 normal washing programmes 
without a load.

Readjust the water hardness setting again according to the 
hardness of the water in your area.

Different kinds of detergent

11

BRILLIANT

RILLIANT

FOR A

SHINE

R I N S E

C O N C E N T R AT E D   D I S H WA S H E R   D E T E R G E N T

ACTION

N E W

DOUBL

E

L I Q U I D   G E L

P O W D E R

EASY

POURING

PACK

For best results we recommend the use of Finish detergents, rinse aid and salt.

DE15

Summary of Contents for ZSF 4112

























Reviews: