Programme selector
Turn the programme selector clockwise or anticlockwise
to select the programme and temperature according to
the programme chart.
Start/Cancel button
In addition to starting a programme you can, by pressing
this button, adjust the setting of the water softener and
cancel a programme in progress.
= reset position
Indicator lamps:
Shows current phase of the selected programme.
• Wash cycle in progress
top lamp
• Drying in progress
middle lamp
• Programme cycle
lowest lamp
ended
Control lamp:
Shows that refilling of salt container is necessary
The programme start can be delayed by 3 hours.
1. Select the desired dishwashing programme. The
programme indicator lamps starts to flash.
2. Press the delay start button. The lamp for the
delayed start lights up.
3. Press the start button. The programme indicator
lamps goes out. The programme will start when
3 hours have elapsed.
Cancelling the delayed start:
Press the delay start button, the lamp for the
delayed start goes out. The required programme
starts immediately.
The control panel
- 6 -
Start/Cancel
button
Programme
selector
Delay start
button
Reset position
On/Off Indicator
lamp
Indicator and
control lamps
How to set the delayed start
