Zanussi Electrolux ZDT 6053, User Manual

Page: 4 / 32

4
Control panel and functions
Programme/Cancel button
On-Off button
End of cycle light
In this fully integrated appliance the controls are located on the top of the door. When selecting a
washing programme, the door needs to be slightly open.
●
Never use the dishwasher if the electrical
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.
●
All sides of the dishwasher must never be
drilled to prevent damage to hydraulic and
electric components.
WARNING!
For electrical and water connection carefully
follow the instructions given in specific
paragraphs.
IMPORTANT!
Always remember that when performing
operations such as:
- selecting a washing programme,
- deactivation/activation of the audible signals,
- setting the water softener,
the appliance
MUST be in setting mode:
●
Press On-Off button, no programme lights
are illuminated and
End of cycle light
flashes = appliance in setting mode .
●
Press On-Off button, a programme light is
illuminated and
End of cycle light is
illuminated with fixed light = last performed
programme still set .
In this case the programme has to be
cancelled (see instructions “Cancel a
washing programme in progress”).
Salt refilling light
156997 18/0en 27-10-2006 15:39 Pagina 4