~ 6 ~
1.
Connect the mini-transmitter to your DVI source (PC).
2.
Connect the receiver to the remote DVI monitor.
3.
Make sure your CAT-5/5e/6 cable is tightly connected and not loose.
4.
Enjoy your high quality PC video on the screen.
5.
5.
5.
5.
If a flickering or a bl
If a flickering or a bl
If a flickering or a bl
If a flickering or a blinking image is seen, try to adjust the rotational switch to improve the cable skew. 0
inking image is seen, try to adjust the rotational switch to improve the cable skew. 0
inking image is seen, try to adjust the rotational switch to improve the cable skew. 0
inking image is seen, try to adjust the rotational switch to improve the cable skew. 0
stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0.
stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0.
stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0.
stands for the strongest EQ while 7 stands for the weakest. Try adjusting the EQ from 7 to 0.
1.
If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and
provide DVI/HDMI EDID information.
2.
All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz LAN cable
and ASTRODESIGN Video Signal Generator VG-859C.
3.
The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the
type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable 300m/1000ft form) can
transmit a lot longer signals than stranded LAN cables (usually in patch cord form). Shielded STP cables are
better suit than unshielded UTP cables. A solid UTP CAT5e cable shows longer transmission length than
stranded STP CAT6 cable. For long extension users, solid LAN cables are your only choice.
4.
EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.
5.
To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use shielded
LAN cables to improve EMI problems, which is worsen in long transmission.
6.
Because the quality of the LAN cables has the major effects in how long transmission distance will be made
and how good is the received display, the actual transmission length is subject to your LAN cables. For
resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.
Performance Guide for DVI over LAN Cable Transmission
Performance rating
Performance rating
Performance rating
Performance rating
Type of LAN cable
Type of LAN cable
Type of LAN cable
Type of LAN cable
W
W
W
Wir
ir
ir
iring
ing
ing
ing
Shielding
Shielding
Shielding
Shielding
CAT5
CAT5
CAT5
CAT5
CAT5e
CAT5e
CAT5e
CAT5e
CAT6
CAT6
CAT6
CAT6
Solid
Unshielded (UTP)
Shielded (STP)
Stranded
Unshielded (UTP)
Shielded (STP)
Termination
Termination
Termination
Termination
Please use EIA/TIA
EIA/TIA
EIA/TIA
EIA/TIA----568
568
568
568----B
B
B
B termination (T568B
T568B
T568B
T568B) at any time
Hardware Installation
Notice
