~ 5 ~
Front Panel — Receiving Unit CV-17-RX
DVI
DVI
DVI
DVI----O
O
O
OUT
UT
UT
UT: : : : Connect to a DVI display with a DVI M-M cable here.
EQ
EQ
EQ
EQ/EDID
/EDID
/EDID
/EDID: : : : Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = strongest – weakest.
It is recommended to switch from 7 to 0 to find the optimal visual experience.
Rear Panel — Receiving Unit CV-17-RX
RJ45
RJ45
RJ45
RJ45----IN
IN
IN
IN:::: Plug in a CAT5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitter.
+
+
+
+5V DV:
5V DV:
5V DV:
5V DV: Connect to 5V DC power supply.
Panel Descriptions
RJ45-IN
+5V DC
DVI-OUT
EQ/EDID
Note for EDID (Extended Display Identification Data) learning
1.
Plug in DVI M-M cable between DVI-OUT and the monitor and power on the CV-17-RX.
2.
Turn EQ/EDID counterclockwise to 7. The LED on the RJ-45 connector will dim and light again in a few seconds, which
indicates the monitor’s EDID is retrieved. DO NOT let the rotary arrow pass 6 which will erase the EDID just learned
and set back to default EDID.
3.
Unplug the DVI M-M cable from the monitor and connect it to the mini-transmitter CV-17-TX. The LED on the RJ-45
connector will dim and light again in a few seconds, which indicates the monitor’s EDID is transferred to the CV-17-TX.
4.
Unplug the DVI M-M cable from the mini-transmitter and reconnect it to the monitor. Connect the mini-transmitter
CV-17-TX to the DVI source and enjoy the visual experience.
5.
To restore the EDID back to default value, please turn EQ/EDID clockwise from anywhere to 6. The LED on the RJ-45
connector will dim and light again in a few seconds, which indicates the EDID is restored to default.
