WHEN INSTALLING THE appliance
ATTENTION
Pipeline connection explanation
Water Inlet
Y-shaped Filter
Tap Water
Thermal expansion tank
(if required)
Barrel-drain
Drainpipe
Condensate Outlet
Pressure Release Valve
Water Outlet
Magnesium
The setup of the pipeline connections can
in no way affect the building’s structure and safety.
• Installation of the water inlet or outlet pipes: The spec of the water inlet and outlet thread
is BSP3/4(internal thread). Pipes must be heat-resistant and durable.
• Installation of the pipe for Pressure release valve: The spec of the valve connecting
thread is BSP3/4(internal thread).
• After installation, it must be confirmed that the drainpipe outlet is exposed in the air.
Drainpipe is joined to the pressure relief orifice of this valve, you must ensure that the
flexible drainpipe is exposed in the air.
• The Pressure release valve attached with the appliance must be installed. • Failure to do
so will cause damage to the appliance, and possible personal injury. • Do not use stainless
steel fittings to connect directly with other metals to prevent galvanic corrosion. • Drain the
water tank through the drain valve at the bottom part of the appliance.
NOTICE
A pressure releasing
valve is to be fitted
in the installation.
Tempering
valve required
VALVE
PRESSURE
0.7MP
Non return valve
Circulation pump
10
