5. OPERATION
SYNTHESIS E
15
5.2. Functional states of the system
5.2.1.
Inactive state
In the inactive state (Fig.1-2) the circuit
board is supplied with current but all the
oven’s functions are disabled, apart from
those for programming.
The display indicates “OFF”, the current
time, the day and time the oven will next be
automatically switched on (if it set, Fig.2).
In the Fig. 1-2 le letters indicate:
A = current hour
B = current minute
C = day, time, minute the oven will be
automatically switched on.
5.2.2.
State of activity
When the oven is off, the rear illumination on
the display is also off.
This turns on when programming is started.
Press the ON key it is entered in a state of activity: it excites the general
contactor, the fan turns on and enables the heating of the oven. The backlit
display turns on and shows the writing thereon in Fig.3, where:
A = Cooking temperature (°C)
B = Program set
C = Cooking time (minutes : seconds)
D = Indicator showing that the top heating element has been turned on
.
E = Top heating elements power (%).
F = Economy function active if lit.
G = Bottom heating elements power
(%)
H = Indicator showing that the
bottom heating element has
been turned on
1
2
3
Summary of Contents for SYNTHESIS 12/80V E
