MAINTENANCE
34
Synthesis
06/40V GAS
8.4.2 Adjustment of minimum power
1 - Remove the safety enclosure of the burner compartment.
2 - Remove the sealing screw placed before and after the gas valve and connect two vertical
tube manometer. (Fig.1)
3 - Turn on the oven and set temperature of 200 ° C. When the burner is lit, the flame intensity
is highest, verify that the pressure indicated by pressure gauge is connected to supply provided
for the adjustments made, otherwise proceed with the regulation through the hexagon A (key 10
Fig.2)
4 - Wait until the oven ports on the phase of the minimum and adjust the pressure of the
minimum through the screw B (screwdriver Fig.2)
8.4.3 Application of new label
Remove the old label on the back of the conveyor oven and clean the area by means of a cloth
dampened with petrol. Apply the new label, showing the kind of gas pressure for which the oven
has been changed (the adapting kit, with new label, instructions and nozzles, is supplied
according to the gas type and pressure).
8.5 WIRING DIAGRAM
La Fig. 10-1 shows the wiring diagram of the conveyor oven Synthesis 06/40V gas.
