_______________________________________________7. WORKING ELECTRONIC VERSION
______________________________________________________________________________
22
CITIZEN 6 - 9/MC
Press again the key
to enter the datum into memory. The parameter is
shown in fixed mode and the display
relating to the oven bottom
heating element starts to blink.
Use the keys
and
until you read the desired parameter on the
display.
Press the key
to enter the datum into memory. The parameter is
displayed in fixed mode and the programming phase is ended.
Remark: Each unit shown by the two displays
and
,
corresponds to the 10 seconds during which the relevant heating element
group is on. For the remaining units the heating element will be off. The total
duration of the cycle is 90 seconds.
The digit relevant to the ignition time of the two heating elements is from 0 to
9 and can be changed at any time by the user, even during the baking cycle.
The heating elements of the oven top turn on during the cycle first phase,
while the ones of the bottom turn on during the second phase.
Parameter
OVEN TOP
Parameter OVEN
BOTTOM
Heating element
ON
Heating element
OFF
0
0
Never active
Never active
1
1
10 seconds
80 seconds
2
2
20 seconds
70 seconds
3
3
30 seconds
60 seconds
4
4
40 seconds
50 seconds
5
5
50 seconds
40 seconds
6
6
60 seconds
30 seconds
7
7
70 seconds
20 seconds
8
8
80 seconds
10 seconds
9
9
Always active
Always active
7.3.3.
Main ON/OFF light switch
When this switch is on 0, the electronic card is not powered and all indicators
of the control panel are off. When the switch is on 1, the card is powered and
the oven is in an inactivity state. The writing “OFF” appears On the display
of the control panel. You can now provide for setting the
temperature, the power, etc. (see chapt.7.3.1 and 7.3.2)
7.3.4.Key
on/off
By pressing the key on/off
you can start the baking cycle according to
the setting previously made.