ZANKER KUAK88ES, User Manual

Page: 3 / 32

–
By clients in hotels, motels, bed and breakfast and other residential
type environments.
•
To avoid contamination of food respect the following instructions:
–
do not open the door for long periods;
–
clean regularly surfaces that can come in contact with food and
accessible drainage systems;
•
WARNING: Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
•
WARNING: Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
•
WARNING: Do not damage the refrigerant circuit.
•
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer.
•
Do not use water spray and steam to clean the appliance.
•
Clean the appliance with a moist soft cloth. Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads, solvents or metal
objects.
•
When the appliance is empty for long period, switch it off, defrost, clean,
dry and leave the door open to prevent mould from developing within the
appliance.
•
Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
•
If the supply cord is damaged, it must be replaced by the manufacturer, its
Authorised Service Centre or similarly qualified persons in order to avoid a
hazard.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the
built-in structure due to safety manner.
• Follow the installation instructions supplied with the
appliance.
• Always take care when moving the appliance as it is
heavy. Always use safety gloves and enclosed
footwear.
• Make sure the air can circulate around the
appliance.
• At first installation or after reversing the door wait at
least 4 hours before connecting the appliance to the
power supply. This is to allow the oil to flow back in
the compressor.
• Before carrying out any operations on the appliance
(e.g. reversing the door), remove the plug from the
power socket.
3