Clock function
Application
End
To set the time of day when the oven should deactivate.
You can use the functions Duration
and End
at the same time to set the
time for how long the appliance should
operate and when the appliance should
deactivate. This lets you activate the
appliance with a delay in time. First set
the Duration
and then the End
.
Setting the clock functions
For Duration
and End
, set an oven function
and temperature of cooking. This is not necessary for
the Minute Minder .
1. Press
again and again until the indicator for the
necessary clock function starts to flash.
2. Press
or
to set the time for the necessary
clock function.
The clock function operates. The display shows the
indicator for the clock function you set.
For the Minute Minder function the
display shows the time left.
3. When the time ends the indicator of the clock
function flashes and an acoustic signal sounds.
Press a button to stop the signal.
4. Turn the knob for the oven functions and the knob
for the temperature to the off position.
With the Duration
and End
functions, the appliance deactivates
automatically.
Cancelling the clock functions
1. Press the
again and again until the necessary
function indicator flashes.
2. Press and hold
.
The clock function goes out after some seconds.
Additional functions
Cooling fan
When the appliance operates, the cooling fan activates
automatically to keep the surfaces of the appliance cool.
If you deactivate the appliance, the cooling fan can
continue to operate until the appliance cools down.
Safety thermostat
Incorrect operation of the appliance or defective
components can cause dangerous overheating. To
prevent this, the oven has a safety thermostat which
interrupts the power supply. The oven activates again
automatically when the temperature drops.
Hints and tips
Warning! Refer to Safety chapters.
The temperature and baking times in the
tables are guidelines only. They depend
on the recipes and the quality and
quantity of the ingredients used.
General information
• The appliance has four shelf positions. Count the
shelf positions from the bottom of the appliance
floor.
• The appliance has a special system which circulates
the air and constantly recycles the steam. With this
system you can cook in a steamy environment and
keep the food soft inside and crusty outside. It
decreases the cooking time and energy
consumption to a minimum.
• Moisture can condense in the appliance or on the
door glass panels. This is normal. Always stand
back from the appliance when you open the
appliance door while cooking. To decrease the
condensation, operate the appliance for 10 minutes
before cooking.
• Clean the moisture after each use of the appliance.
• Do not put the objects directly on the appliance floor
and do not put aluminium foil on the components
when you cook. This can change the baking results
and cause damage to the enamel.
8
Summary of Contents for KOU25612
Page 1: ...KOU25612 User Manual Oven Benutzerin formation Backofen ...
Page 39: ...39 ...