ZANKER KIT8470XXK, User Manual

Page: 9 / 32

etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
• you use incorrect cookware. The symbol comes
on and the cooking zone deactivates automatically
after 2 minutes.
• you do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting The hob deactivates af-
ter
, 1 - 2
6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hour
The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat setting or move
your finger along the control bar until you reach the
correct heat setting.
Automatic Heat Up
Activate this function to get a desired heat setting in a
shorter time. When it is on, the zone operates on the
highest setting in the beginning and then continues to
cook at the desired heating setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
( comes on). Immediately touch a desired heat
setting. After 3 seconds comes on.
To deactivate the function: change the heat setting.
PowerBoost
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to “Technical data” chapter.
To activate the function for a cooking zone: touch
. comes on.
To deactivate the function: change the heat setting.
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
First set the heat setting for the cooking zone then set
the function.
To set the cooking zone: touch again and again
until the indicator of a necessary cooking zone comes
on.
To activate the function or change the time: touch
or of the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone with
and touch . The remaining time counts back to
00. The indicator of the cooking zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch .
Minute Minder
You can use this function as a Minute Minder when the
hob is activated and the cooking zones do not operate.
The heat setting display shows
.
To activate the function: touch . Touch or of
the timer to set the time. When the time comes to an
end, the sound operates and 00 flashes.
To stop the sound: touch .
9