ZANKER KEI8442X, User Manual

Page: 23 / 48

Problem Possible cause and remedy
comes on
There is an error in the appliance, because a cookware boils dry. The pro-
tection against become too hot for the cooking zone operates. The Auto-
matic Switch Off operates.
Deactivate the appliance. Remove the hot cookware. After, approximately
30 seconds activate the cooking zone again.
should go out of the
display, residual heat indicator can stay. Let the cookware become suffi-
ciently cool and check it with the section Cookware for the induction cook-
ing zone.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service.
Give the data from the rating plate, three digit letter
code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on. Make sure, you operated the appliance correctly. If not
the servicing by a customer service technician or dealer
will not be free of charge, also during the warranty peri-
od. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
please contact your local council, your household waste
disposal service or the shop where you purchased the
product.
Packaging material
The packaging materials are friendly to the envi-
ronment and can be recycled. The plastic compo-
nents are identified by marking: >PE<,>PS<, etc. Dis-
card the packaging materials as household waste at the
waste disposal facilities in your municipality.
23