ZANKER KDT10042FK, User Manual

Page: 19 / 44

Problem Possible cause and solution
Limescale deposits on the tableware,
on the tub and on the inside of the
door. • The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Even using multi-functional tabs use salt and set regeneration of the
water softener. Refer to "The water softener".
• If lime scale deposits still remain, clean the appliance with appliance
cleaners which are particularly suitable for this purpose.
• Try different detergent.
• Contact the detergent manufacturer.
Dull, discoloured or chipped tableware. • Make sure that only dishwasher-safe items are washed in the appli-
ance.
• Load and unload the basket carefully. Refer to basket loading leaflet.
• Place delicate items in the upper basket.
Refer to "Before first use", "Daily use"
or "Hints and tips" for other possible
causes.
Technical information
Dimensions Width / height / depth (mm) 596 / 818-898 / 550
Electrical connection 1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure bar (minimum and maximum) 0.5 - 8
MPa (minimum and maximum) 0.05 - 0.8
Water supply
Cold water or hot water 2)
max 60 °C
Capacity Place settings 13
Power consumption Left-on mode (W) 5.0
Power consumption Off-mode (W) 0.10
1) Refer to the rating plate for other values.
2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to
decrease energy consumption.
Rating Plate
Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ...
19