Filling the rinse aid dispenser
1
2
1
2
1
2
3
4
A
3
2
1
4
Fill the rinse aid dispenser when the lens (
A
) is
clear.
To adjust the released quantity of rinse aid, turn the
selector between position 1 (lowest quantity) and posi-
tion 4 (highest quantity).
Daily use
1. Open the water tap.
2. Turn the programme knob until the programme
marker is aligned with the programme you want to
set. Make sure that the appliance is in setting
mode, refer to “Setting and starting a programme”.
Set the correct programme for the type of load
and the degree of soil.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
Using the detergent
1
2
1
2
20
30
A
B
3
20
30
4
Put the detergent or the tablet in compartment (
A
) If
the programme has a prewash phase, put a small
quantity of detergent in compartment (
B
).
Using the combi detergent tablets
When you use tablets, that contain salt and rinse aid,
do not fill the salt container and the rinse aid dispens-
er. The rinse aid indicator always comes on if the rinse
aid dispenser is empty.
1. Adjust the water softener to the lowest level.
2. Set the rinse aid dispenser to the lowest position.
17
