ZANKER KBA19001SK, User Manual

Page: 19 / 44

Problem Possible cause Solution
The temperature in the appliance is
too low/too high. The temperature regulator is not
set correctly. Set a higher/lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The food products' temperature is
too high. Let the food products temperature de-
crease to room temperature before
storage.
Many food products are stored at
the same time. Add less food products at the same
time.
The door has been opened often. Open the door only if necessary.
There is no cold air circulation in
the appliance. Make sure that there is cold air circula-
tion in the appliance.
If the advice does not lead to the desired
result, contact the nearest Authorised
Service Centre.
Replacing the lamp
The appliance is equipped with a long-
life LED interior light.
It is strongly recommended to use
original spare parts only.
Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
Caution! Disconnect the plug from the
mains socket.
1. Using a screwdriver, remove the screw from the
lamp cover.
2. Detach the lamp cover in the direction of the
arrows.
3. Replace the lamp with the one that has identical
characteristics and is specifically designed for
household appliances.
4. Reassemble the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door.
Make sure that the light switches on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to assembly
instructions.
3. If necessary, replace the defective door gaskets.
Contact the Authorised Service Centre.
19