14
(fig. 6). If there is a 4 cm worktop, the hooks
should be placed as shown in figure 7a, that
is with the long part into the opening. Other-
wise, if there is a 3 cm worktop, the hooks
should be placed as shown in figure 7b, that
is with the short part into the hole.
IMPORTANT: Perishable things should
not be put below the hob.
CONNECTING TO THE ELECTRICAL
MAINS
The connection to the mains electrical sup-
ply must be made by a professional electri-
cian, who must take care to observe the nec-
essary precautions.
Before making the connection, check that:
- the mains voltage is as indicated on the
nameplate;
- the electrical line to which the appliance is
connected is of rated power appropriate to
the maximum power absorption of the ap-
pliance, indicated on its nameplate;
- the earth connection is in good working or-
der.
If the socket is not easily accessible, the in-
stallation engineer must provide an
omnipolar switch with a contact breaking gap
of 3 mm or more.
- If the appliance is supplied without lead,
using type H05RR-F or H05V2V2-F cable
of suitable size (see diagrams in fig. 2).
- Calibre of the protection device: 30A.
To connect the hob to the electrical mains:
- remove the controls protection cover on the
underside of the hob by unscrewing the 3
screws (see fig. 8);
- connect the power supply lead to the ter-
minal board, following the diagrams of fig-
ure 2;
- fix the cable with a cable clamp (see fig. 9);
- replace the protection cover.
IMPORTANT
: the manufacturer declines all
liability for damage due to failure to comply
with the regulations and standards in force.
Check that the appliance is correctly con-
nected to the earth (see diagrams in fig. 2 at
the back of the manual).
CAUTION
- Before doing any work inside the hob, dis-
connect the mains plug.
GB
Installation
