background image

2

Advanced MCU control pulse width modulated (PWM) technology, high efficiency

operation.

Target for LiFePO4, LTO (Lithium Titanium Oxide), Gel, AGM, Conventional

lead-acid (WET) and Calcium Batteries.

Built in regulator to prevent your battery from being overcharged. Overcharging

occurs when the charge voltage is unregulated. This can result in premature battery

failure.

Come with regulator to prevent your battery from being under charged, in the solar

energy field, battery undercharge always occurs, especially on some Conventional

lead –acid or Calcium batteries; The unit provides an automatic Equalization feature

for deeply drained Conventional lead acid battery or Calcium battery, as well as

provides a cycling automatic Equalizing feature every 28 days.

Can be connected to the battery permanently to keep the battery fully charged by

using a process called “floating”. This means the controller will stop charging when

the battery is full and will automatically start charging the battery as required. This

process will also reduce water loss and help prevent the battery from ‘drying out’.

Protects your battery from discharge at night. Under low light or no light conditions

the solar panel voltage could be less than the battery voltage. The unit contains a

special circuit which prevents current flowing back from the battery and into the

solar panel.

Colored LED’s to easily indicate the operational status and battery conditions.

Digital LCD to directly display battery voltage, charging current, charging capacity

(Amp hour), battery types and faulty codes.

Provides plug-in remote digital display meter (Optional).

Provides external battery temperature sensor (Optional).

Multi charging protections against reverse polarity, short circuit, over temperature,

over voltage, etc.

Surface Mount or Flush Panel Mount options.

Conformal-coating circuit boards and plated terminals apply to hostile environments.

For use with 12Volt Solar Panel Only

Suitable for Solar panels up to 510 Watts / ZS-30A; 680Watt / ZS-40A

FEATURE

Summary of Contents for ZS-30A









Reviews: