Zamel VP-816B, Manual, Page: 45 / 48

8
ANSWERING AN ENTRANCE PANEL CALL
When a visitor presses the Call button on the entrance panel, all connected indoor displays
will sound the call chime at the same time as the INCOMING CALL message on each display
screen. Touch the
icon to answer the call. Touch again to send the calling
entrance panel camera feed to all other displays. If you touch before the call is switched
by a user of another display in the system, you will return to the calling visitor. If the call is not
answered by the time the call chime stops, the display will enter standby mode. Touch the
icon to release the electric catch of the calling entrance panel during the call. The
display will show DOOR OPEN. Touch the XXX icon to open the gate. The display will show
GATE OPEN. If another caller tries to reach you during your call, the display will show
VISITOR AT DOOR 2. Touch the
icon to answer and switch to the second call.
Note: Touch and hold the icon during an entrance call or an internal call
(display-to-display intercom mode) to mute your microphone. The display will show MUTE.
Touch and hold
again to unmute your microphone, which the display will confirm with
SPEAK. Operating a gate requires the NC06 gate control module in the system.
VIDEO FEED MONITORING
With the display on standby, touch and hold to monitor the video feed from entrance
panel 1. Touch again to switch to the next video feed.
The CCTV camera video feeds can only be monitored this way if the Port 4 status is Enabled
(see Table SYSTEM SETTINGS, item 10).
Touch to start a voice call with the visitor at the entrance panel from which you are
monitoring the video feed. Touch to unlock the door of the same entrance panel.
When monitoring the video feed from Door1/Door2/CCTV1/CCTV2, touch and hold to
change the screen aspect from 16:9 to 4:3.
PUBLIC ADDRESS MODE
The Public Address mode allows you to speak through all displays connected to the video
entry phone system. When the display is on standby, touch and hold
on the screen.
The PUBLIC ADDRESS CALL message will be displayed. All other displays in the system
will display