Zamel VP-816B, Manual, Page: 44 / 48

7
WIRING SPECIFICATIONS
The system supports two electric catch release configurations: with the open command sent
by (i) an entrance panel or (ii) a system display (the display open command output wire must
have the shield connected to earth).
If the open command is sent by an entrance panel, use this wiring specification:
•
If the entrance panel is < 30 m away from the video entry phone display, use YTDYw 4x0.5
mm
2 wiring.
Tekst Tłumaczenie
CZERWONY RED
NIEBIESKI BLUE
ŻÓŁTY YELLOW
BIAŁY WHITE
ZIELONY GREEN
BRĄZOWY BROWN
ELEKTROZACZEP ELECTRIC CATCH
PANEL ZEWNĘTRZNY ENTRANCE PANEL
•
If the entrance panel is > 30 m away from the video entry phone display, use YTDYw 4x0.5
mm
2 wiring.
If the open command is sent by a display, use this wiring specification:
•
If the entrance panel is < 30 m away from the video entry phone display, use YTDYw 6x0.5
mm
2 wiring.
Tekst Tłumaczenie
CZERWONY RED
NIEBIESKI BLUE
ŻÓŁTY YELLOW
BIAŁY WHITE
BRĄZOWY BROWN
ZIELONY GREEN
CZARNY BLACK
PANEL ZEWNĘTRZNY ENTRANCE PANEL
ELEKTROZACZEP ELECTRIC CATCH
•
If the entrance panel is < 30 m away from the video entry phone display, use YTDYw 6x0.8
mm
2 wiring.