5s
. . .
5s
. . .
5s
. . .
Shutter 1
Shutter 2
Shutter 3
Automatic
control by the
programme
The remote control signals that the battery level is low to inform the user
that it should be replaced. This ensures the correct operation of the re-
mote control and has a key effect on the operating range. Low battery
level information is displayed on the LCD as a "
Lo_batt
" message.
FULL BATTERY DISCHARGE INDICATOR
To define delay for the group, you have to:
1. Go to the "
dELA
" screen in the remote control menu by pressing the
button.
2. Confirm the selection with the button.
3. Use the , buttons to select the group number for which you want to
define the delay.
4. Use the , buttons to set the delay value from 0s to 60s in 1s incre-
ments. 0s means no delay.
5. Confirm the selection with the button.
6. The group number can be changed with the , buttons. To return to the
main remote control menu, wait for t=10s.
REPLACING THE BATTERY
1. Remove the battery cover.
2. Carefully remove the battery from the socket.
3. Press any transmitter button several times (to discharge the capaci-
tor).
4. Install a new battery paying special attention to polarity.
CAUTION: Incorrect battery installation may damage the
remote control!
5. Check the operation of the remote control after installing the battery.
6. Put the battery cover back on.
group
selection
setting the delay
value