10s
The maximum (default) number of channels in the P-521/L remote control
is 30. Select the active channel using the , buttons. If the remote con-
trol user does not use all available channels, then it is possible to limit the
number to the required channels.
1. Press the button shortly (0.5s) under the battery cover to go to the Ch
screen.
2. Press the button for a short time (0.5s).
3. Set the number of active channels with the , buttons. Confirm the
setting with the button.
4. Press shortly (0.5s) the button to leave the menu (or wait 10 seconds
to leave it automatically).
SETTING THE NUMBER OF ACTIVE CHANNELS
Active channels/groups are switched during normal use with the , but-
tons. The groups are only visible after they have been defined.
CHANNEL / GROUP SWITCHING
The remote control allows the user to programme up to 100 programmes.
The programme can be assigned to the given channel, several channels,
or to a group.
By setting the program, you define:
● programme number,
● channel(s) or group number,
● execution time,
● day of the week,
● command: open, close,
● programme status: activation, deactivation.
Programmes are set using the remote control menu –
ProG
’ screen
1. Go to the ProG screen in the remote control menu by pressing the
button.
2. Confirm the selection with the button.
3. Select the number of the programme to be edited (from 001 to 100)
using the , buttons.
4. Use the button to go to the channel(s) or group selection.
5. Use the , buttons to select channels / groups. The channel/group
can be activated/deactivated with the button.
● channel / group number flashes - channel / group
disabled
,
● The channel / group number lights up continuously - channel / group
enabled
.
6. Use the button to set the hour of the programme execution.
7. Use the , buttons to set the time.
8. Use the button to set the minutes of the programme execution.
9. Use the , buttons to set the minutes.
10. Use the button to set the day of the week.
PROGRAMME SETTING