ZALMAN ZM80D-HP, Manual, Page: 12 / 16

ZM80D-HP
www.zalman.co.kr www.zalmanusa.com
12
Heatpipe B
Heatpipe A
Groove for
Heatpipe A
Groove for
Heatpipe B
Backside Heatsink
Backside
Heatsink Base
Bolt B( 8 mm)
Backside Heatsink
Heatpipe B
Heatpipe A
Bolt B(8 mm)
Heatpipe
Cover
1) Place the Backside Heatsink between Heatpipe A and the Backside Heatsink Base.
2) Place Heatpipe A into the groove for Heatpipe A on the Backside Heatsink.
3) With Heatpipe A in its groove, position the Backside Heatsink so that Heatpipe B is inserted in its groove on the Backside Heatsink.
4) Tighten the Backside Heatsink and the Backside Heatsink Base with Bolt B.
6.17 Installing the Backside Heatsink
Insert the Heatpipe Cover as shown in the diagram. Tighten with Bolt B.
6.18 Installing the Heatpipe Cover
Tighten both heatsinks and the Heatpipe Cover by screwing Bolt B completely.
6.19 Tighten Bolt B for the Two Heatsinks Completely (VERY IMPORTANT)
Note) If Bolt B is not tightened completely, it may result in decreased performance.
Bolt B (8 mm)
Bolt B (8 mm)
Frontside Heatsink
Heatpipe Cover
Bolt B
Backside Heatsink