4.6 Hard Disk Drive Installation
4.7 Cable Connection
4.8 Front I/O Connection
(1) Open (raise to unlock) the HDD Lock Bar of the desired HDD Chassis Bay.
(2) Slide HDD into desired Bay and close (lower to lock) the HDD Lock Bar behind the HDD.
(3) To remove the HDD, open (roll up) the HDD Lock Bar above the HDD.
(4) For transportation, lower the HDD Lock Bar and secure with Hand Bolts as shown below.
Improper connection of the Power LED and
HDD LED can lead to LED malfunction.
Please refer to your motherboard’s manual
before making cable connections.
Certain motherboards have different configurations for the IEEE1394a, USB2.0, and audio
connectors from the one shown in the diagram below. Please refer to your motherboard’s
manual.
Note1) Excessive pressure may damage the HDD Lock Bars. Please take caution during HDD installation
and removal.
Note2) Reverse the procedure for removal.
Note) Improper connections of the IEEE1394 connector and/or USB2.0 connector to the motherboard
can result in irreversible damage so please refer to both the product and your motherboard’s
manual prior to installation.
HDD chassis
Lock Bar
Fixing Tap Hole
Lock Bar
Hand Bolt
Lock Groove
Button PCB
I/O Port PCB
9
10
Summary of Contents for LQ1000
Page 1: ......