Use and programming
Coffee measure programming
Place the programming switch in the ON
position. It is located inside the coffee
machine on the left-hand side panel of the
body. To access the inside of the machine
remove the top tray cup warmer.
The buttons T1-T2-T3-T4 will light up.
The button T5 will flash.
IMPORTANT
Programming mode
Use the button T5 to swap between pre
i n f u s i o n a n d n o p r e i n f u s i o n
programming mode.
When the button (T1/T2/T3/T4) flashes
you are in pre infusion mode
When the buttons light up you are in
normal pouring mode (no pre infusion)
0
1
2
T1 T2 T3 T4 T5
ON
IMPORTANT
The programming of every dose must be
done with ground coffee and not with
previously used grounds. With machines
having two or three groups, by first
programming the right-hand buttons
panel the others are automatically
programmed. It is however both possible
and advisable to program the push button
panels independently, always starting
from the right-hand button panel.
1
2
2
1
Flash
Light Light Light Light
Flash
Flash
Flash
Flash
Flash
T1
T1
T2
T2
T3
T3
T4
T4
T5
T5
T5
T4
T3
T2
T1
T5
T4
T3
T2
T1
Pre infusion mode
NO pre infusion mode
9
ZagatO
!
NOTE
!
NOTE
Programming
switch located
inside
machine
Espresso Italia PTY LTD
www.espressoitalia.com.au
Freecall 1300 660 976
