Adjusting Rod Mount and Rods
Mounting VCT Pro to VCT-14
(VCT-14 Sold Separately)
Additional Accessories
Adjust rod height by loosening both
front allen screws equally. Slide the rod
mount up or down for desired position
and re-lock allen screws.
Attach rods to VCT Pro by loosening
ratcheting lever, sliding rods into place
and then re-tighten lever.
Remove both allen screws and separate
rod mount with rods from VCT body.
Flip rod mount over from original position.
Align and remount allen screws to VCT
body. Adjust to desired height and
re-lock allen screws.
1
2
3
Pull red lever on VCT-14 to release your
Universal VCT Plate.
Mount VCT Plate to VCT-14 by sliding the
front wedge into front slot of the VCT-14
and the tail hook around the rear knob of
VCT-14. The VCT-14 will click when the
VCT Plate is locked into place
An alternative
mounting method
when using a tripod
without a VCT-14, is to
mount your tripod’s quick release wedge plate
to the wedge on the bottom of the VCT Pro.
Tripod Quick
Release Plate
Flipping Rod Mount
for More Height
Rear Rod Ports
Attach rods to VCT Pro by
loosening ratcheting lever,
sliding rods into place and
then re-tightening lever.
Rosette Mounted Grip
The M6 Rosette can be used to
mount a handgrip like the trigger
grip or other camera specific grips.
VCT Pro Dock
Remove the Sliding Red Plate and attach to the
VCT Pro Dock when using a tripod, sliders, etc.
Learn more at www.zacuto.com
Z-Rail Half Cage
Mount the 3” Z-Rail to the
side of the VCT Pro. Loosen
ratcheting lever and slide
Half Cage jaws onto Z-Rail.
Re-tighten ratcheting lever
when in desired position.
