Version 1.0 011315
Figure 2:a
Mounting Rosette Mini Mount
Figure 3:a
Mounting FS7 Axis Mini to Camera
Figure 3:b
Operating Axis Mini
Figure 3:c
Operating Axis Mini
Figure 4:a
Additional Accessories (Sold Separately)
Figure 2:b
Mounting VCT Arri M6 Rosette (Sold Separately)
?
See front figure for full correct Assembly
Check out our tutorial videos at zacuto.com
For additional accessories visit store.zacuto.com
NEED
MORE
HELP
Loosen this knob to adjust
the length of the Axis Mini.
Loosen this knob to adjust
the lower rotation.
Loosen this knob to adjust
the upper rotation.
Mount the Rosette Mini Mount to
the 15mm VCT Rods and tighten
the ratcheting lever when in
desired position.
Attach the Sony arm and
grip to the rosette mini
mount.
The VCT Arri M6 Rosette is attached to
either side of the VCT to attach the Sony
arm and grip.
A Gratical HD/LT can be attached
directly to the Axis Mini using rosette
mounts.
Mounting Z-Drive and Tornado
to VCT Rods
1
2
1
2
Remove the two front screws
from the top of the Camera.
Mount the Axis Mini Mount to the
top of the camera using the two
supplied mounting screws.
3
When using the front rod
mount, the two parts need
to be assembled before
mounting to camera.
4
Mount rods for additional accessories
2
2
1
2
3
4
Mount the Axis Mini to the rod port and lock in
place with the ratcheting lever.
Attach the Axis Mini to the rosette
Mount the Sony FS7 Screen to the rosettes rod.
Adjust rig to fit comfortably to user’s eye.
