Wireless Broadband 11n Router User Guide
28
WDS Settings
In this mode, you can expand the scope of network
by combining up to four other access points together,
and every access point can still accept wireless
clients.
Lazy Mode:
You need configure the router’s BSSID
into another device, not need input another router’s
BSSID in it, and then connect together automatically.
Bridge Mode:
You can wirelessly connect two or
more wired networks via this mode. In this mode, you
need to add the Wireless MAC address of the
connecting device into the Router's AP MAC address
table or select one from the scanning table. At the
same time, the connecting device should be in Lazy,
Repeater or Bridge mode.
Repeater Mode:
You can select the mode to extend
the distance between the two WLAN devices.
Functioning as a WDS repeater, the ZW-BR11NT
connects to both a client card as an AP and to
another AP. In typical repeater applications, APs
connecting to other APs equipped with WDS
