1. Remove the water tank by detaching it from the main body.
(See step 1, in How to Use)
2. Remove the long water sponge cover, located under the main body,
by turning it 90° to the left or right and then pulling it out, as illustrated in Fig 1.
3. Replace the water sponge. Fig 2.
4. Align the short slit on the short water sponge cover with the long slit on the
long water sponge cover and push the long water sponge cover to lock the
water sponge in place. Fig 3.
Please contact the customer service where you purchased your device from
to order more replacement water sponges.
HOW TO REPLACE WATER SPONGE
For optimum performance the ultrasonic disc should always be shiny clean and
free of any limescale (foggy) deposits. You need to clean the ultrasonic disc as
soon as you notice limescale deposits on the disc.
This can vary from a weekly to monthly basis depending on the frequency of
use and the hardness of water. To clean, use a cotton swab and dip it into a
mixture of ½ white vinegar and ½ water and rub the outer and the inner surface
of ultrasonic disc with cotton swab, as illustrated, until you remove all deposits
from the disc. In order to clean the inner surface of the ultrasonic disc, you will
need to remove the water sponge. See HOW TO REPLACE WATER SPONGE
section
We recommend replacing the water sponge every 2 months based on 4 hours/
day use, or sooner if using the device for longer periods of time, if hard tap water
is used, or if the device is emitting less mist than usual.
One replacement water sponge is included in your package.
MAINTENANCE
To replace Aroma sponge, simply remove it from the Aroma compartment and
replace.
Please contact the customer service where you purchased your device from to
order more replacement water sponges or aroma sponges.
HOW TO REPLACE AROMA SPONGE
(DELUXE MODEL ONLY)
WATER TANK and WATER SPONGE
6. Aroma Diffuser
(Deluxe model only)
Remove the cover with the Aroma sponge compartment and put a few
drops of your favorite essential oil onto the Aroma sponge. Put the Aroma
compartment back in place.
7. LED Night Light
(Deluxe model only).
Plug the Night Light attachment into the external USB
outlet located on the top of the device. Make sure that the
USB cord is plugged. The Night Light will turn On.
To turn Off the Night Light unplug it from the external
USB outlet.
Fig 3
Short Slit
Long Slit
Fig 1
HOW TO CLEAN ULTRASONIC MIST MAKER (DISC)
Always keep water tank clean and dry when not in use.
If needed it can be hand cleaned with warm soapy water and rinsed thoroughly.
If the water sponge has been left sitting in the water tank, in water, and unused
for an extended period of time, it should be rinsed thoroughly under running
water before use.
Alternatively, the water sponge should be replaced as outlined above.
Fig 2
Water
Sponge
Do not add essential oil into the water tank,
to avoid damage in the device
!
CAUTION
Unplug the device when cleaning, replacing
parts or moving the device.
!
CAUTION
