DOC-USR-0077-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
30
9.0
SUMMARY OF OPTIONS
This section lists the different options that are available in the various menus.
9.1
The System Setup Tab
Parameter
Options (default in bold) Notes
Local IP Address
192.168.x.y
(192.168.81.68)
Sets the IP address of the Z3-HE4K-R. Note that a
“save” of these settings and a reboot is needed for
changes to this value to take effect.
Local Netmask
255.255.z.w
(
255.255.0.0
)
Sets the netmask of the Z3-HE4K-R. Note that a
“save” of these settings and a reboot is needed for
changes to this value to take effect.
Default Gateway
192.168.a.b
(
192.168.0.1
)
Sets the network gateway to use for the Z3-HE4K-R.
Note that a “save” of these settings and a reboot is
needed for changes to this value to take effect.
Use DHCP
Checked
Unchecked
Sets whether DHCP is used. See “Running DHCP” for
more details.
Display Mode
(Decode Only)
HDMI
Needs to be set to HDMI on the Z3-HE4K-R.
Resolution
(Decode Only)
(See Note 1)
2160p30
Sets the resolution to set the display to.
Layout
(Decode Only)
1x1
Always 1x1 in the Z3-HE4K-R
Set Display
(Decode Only)
If a resolution is different from the default is
desired, the user would change to the desired value
and then click the “set Display” button.
Set Device Name
Sets the name for the Z3-HE4K-R.
Set Password
Sets the system password. See Section 8.3, “Using
the Password Feature” on page 28 for more details.
update device firmware
Click to update to new firmware. See Section 8.2,
“Making a Firmware Update” on page 27 for more
details.
