CONFIDENTIAL
DOC-USR-0055-05
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
43
8.0
STREAMING RTMP IN THREE DIFFERENT RESOLUTIONS
This section shows how to use the Z3-DM8107-SDI2-RPS to take one video input and stream it over RTMP
into three different resolutions (720p, D1, and CIF). The Wowza Streaming Engine
TM
is used as an example
RTMP server.
These instructions can also be used to determine how to stream the same input into multiple
configurations. Simply specify “RTP”, “UDP”, or “TSFILE” instead of “RTMP”, and ignore the sections
referring to Wowza in this section. Note that, if multiple channels off the same input is done, the total
performance cannot exceed the capability of the Z3-DM8107-SDI2-RPS (up to the equivalent of one 1080i
one 720p encode is supported).
*
Note
:
VLC does not support RTMP. The test player within Wowza Streaming Engine
TM
is recommended.
8.1
Connect the Encoder
(1)
Follow steps (1) to (11) in Section 7.0 to connect the Z3-DM8107-SDI2-RPS for encode and bring up
the Encoder GUI.
8.2
Configure the Encoder to “Encode 1 to 3 Ch” Mode
(2)
At the “Operating Mode” dropdown menu near the bottom, select “Encode 1 to 3 Ch”:
(3)
Two channels can be configured. To create a third channel, click on the “+” to the right of the CH2
tab.
Figure 39 Changing to “Encode 1 to 3 Ch” Mode
(1)
Change to
“Encode 1 to 3 Ch” Mode
Click on “+” to create CH3
Figure 40 Creating CH3
