CONFIDENTIAL
DOC-USR-0055-03
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
68
device=eth0, addr=192.168.81.7, mask=255.255.0.0, gw=192.168.0.1,
host=Z3-DM810x, domain=, nis-domain=(none),
bootserver=192.168.0.5, rootserver=192.168.0.5, rootpath=
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 195289088 bytes (190712 KiB, 186 MiB, 1538 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:14.
devtmpfs: mounted
Freeing init memory: 232K
init started: BusyBox v1.15.0.svn (2014-10-16 09:24:49 CDT)
starting pid 57, tty '': '/etc/init.d/rcS'
Please wait: booting...
Starting udev
udevd (79): /proc/79/oom_adj is deprecated, please use /proc/79/oom_score_adj instead
.
udev: starting version 141
PHY: 0:01 - Link is Up - 100/Full
Root filesystem already rw, not remounting
root: mount: mounting rootfs on / failed: No such file or directory
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
Wed Dec 2 18:59:00 UTC 2009
Starting syslogd/klogd: done
BoardID=4
************** Configure 30-0030 board
omap_i2c omap_i2c.1: controller timed out
i2cset -y -n 1 0x5c 0x03 0x00 b returned 1
EDID2 success
5150 driver init called
adv7611 1-004d: chip found @ 0x9a (OMAP I2C adapter)
z3netra-000: v4l2 sub device adv7611 registered grp xc
z3netra-000: v4l2 sub device register fails
gv7601_probe returns 0
z3netra-000: v4l2 sub device gv7601.0 registered grp x3
5150 driver probe called
tvp5150 1-005c: chip found @ 0xb8 (OMAP I2C adapter)
z3netra-000: v4l2 sub device tvp5150 registered grp x4
z3netra-000: V4L2 device registered as video0
Z3 Netra video decoders ver 0.6.0 successfully loaded, 1 devs.
Starting telnet daemon.
Starting web configurator
NET: Registered protocol family 10
**
** Point your browser to
**
