![Z3 Technology SBE264-10-RPS User Instructions Download Page 82](http://html1.mh-extra.com/html/z3-technology/sbe264-10-rps/sbe264-10-rps_user-instructions_3107896082.webp)
CONFIDENTIAL
DOC-USR-0171-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
82
: values=off
numid=94,iface=MIXER,name='Left PGA Mixer Line1R Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=85,iface=MIXER,name='Right PGA Mixer Line1R Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=97,iface=MIXER,name='Left PGA Mixer Mic3R Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=88,iface=MIXER,name='Right PGA Mixer Mic3L Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
Setting dns from kernel cmdline
/sys/kernel/debug is not a mountpoint
Setting L3 bandwidth regulator for [HDVICP0 ] to [press=[3,3] BW=2000, WM Cycles=4000]
Setting DMM priority for [DUCATI ] to [0] ( 0x4e000624 = 0x08000000 )
Setting DMM priority for [HDVICP0 ] to [2] ( 0x4e000634 = 0x0000000a )
==== run RDK loadmodule ====
Attached to slave procId 1.
Loaded file ../firmware/dvr_rdk_fw_m3vpss_1024M_256M.xem3 on slave procId 1.
Started slave procId 1.
After Ipc_loadcallback status [0x00000000]
After Ipc_startcallback status [0x00000000]
Attached to slave procId 0.
Loaded file ../firmware/dvr_rdk_fw_m3video_1024M_256M.xem3 on slave procId 0.
Started slave procId 0.
After Ipc_loadcallback status [0x00000000]
After Ipc_startcallback status [0x00000000]
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[m3vpss ] Received character 's'
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[m3video] Received character 's'
/opt/dvr_rdk/ti810x
ORG 0x46c00524: 0
NEW 0x46c00524: 2
==== run RDK application ====
running demo mcsenc_demo
Starting mcsencd.
query acodecs
here are the audio codec options: none fdk_aaclc fdk_aaclc_mp2 fdk_aache fdk_aache_v2 arm_mp12 arm_g711_alaw
set demo mode to interlaced_progressive
+OK
Z3 Technology, LLC DM8107-MOD-SDI2-RPS v2.35
H.264 multichannel
+==============================================================+
| Current |
| P - Change local IP address 192.168.81.7