CONFIDENTIAL
DOC-USR-0027-07
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 U.S.A.
♦
+1.402.323.0702
29
7.4
The CH1 Tab
Parameter
Options (default in bold)
Notes
Video Source
HDMI
, Component, Composite
Where to get input for channel 1.
Video Resolution
320x180 –
1920x1080
The encode resolution for channel 1 [
Note 1
].
Video Bitrate
100 – 12000K (
8000K
)
The bit rate for channel 1.
Video Profile
High
, Main, Baseline
The H264 profile of the bitstream. Generally
High is used for 1080p, Main for D1, and
Baseline for < D1.
Frame Rate Divider
1
, 2, 4
Used to encode at less than the input frame
rate (for example, an input frame rate of
30fps with a divider of 2 would cause an
output stream of 15fps).
Number of B-frames
0
– 3 (
1
)
# of B-frames between P-frames.
GOP Size
10 – 240 frames (
60
)
I-frame frequency [
Note 2
].
Video Delay
0 – 9999 (
2000
)
# of ms to buffer. The higher the value, the
smoother the encode, but also the higher the
latency.
Audio Enable
True
, False
True -> Encode audio.
Audio Source
HDMI1,
HDMI2, Analog1,
Analog2, None
If Audio Enable = True, where to get Audio
for channel 1.
Audio Codec
AAC-LC
The codec to use for audio.
Audio Sample Rate
16KHz, 32KHz, 44.1KHz,
48KHz
The sample rate for audio.
Audio Mode
Mono,
Stereo
Select between stereo and mono inputs.
Output Format
RTP
, UDP, File
Output format of encoded stream. Note:
RTP requires an SDP file for the receiver.
Dest Address
192.168.x.y
(192.168.0.6)
The IP address that the encoder is streaming
to.
Dest Port
0 – 9999 (
5004
)
The port that the encoder is streaming to.
Audio PID (UDP Only) 0 – 999 (
120
)
PID assigned to audio in the TS stream.
Video PID (UDP Only) 0 – 999 (
220
)
PID assigned to video in the TS stream.
PCR PID (UDP Only)
0 – 999 (
520
)
PID assigned to PCR in the TS stream.
Stop
Stop current encode session.
Start
Start encode session.
Clone
Duplicate CH tab (can be used to quickly copy
CH1 values to CH2, for example).
Delete
Used to delete excess tabs created by Clone.
Status
IDLE, STOPPED, RUNNING
Current status of the encoder.
