Z3 Technology HE4K-DCK-RPS User Instructions Download Page 1

Page: 1 / 38

CONFIDENTIAL

DOC-USR-0101-01

____________________________________________________________________________________

Z3 Technology, LLC

♦

100 N. 8th St. STE 250

♦

Lincoln, NE 68508-1369 USA

♦

+1.402.323.0702

User Instructions

4K HEVC/H.265 & H.264 Encoding System

Rapid Production Starter Kit

Model Name:

HE4K-DCK-RPS

DOC-USR-0101-01

Manual Version 1.0.0

July 21, 2016

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

This document contains proprietary and confidential information of Z3 Technology, LLC ("Z3"). This document may not be used, reproduced,

disclosed, or disseminated to anyone without the prior written approval of an authorized representative of Z3.

Z3 Technology, LLC incorporates HDMI® technology.

The terms of HDMI and HDMI High-Definition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Summary of Contents for HE4K-DCK-RPS







































Search results

Summary of Contents for HE4K-DCK-RPS

Reviews:

Related manuals for HE4K-DCK-RPS

Brands by name

Popular brands

Z3 Technology HE4K-DCK-RPS, User Instructions

Search results

Summary of Contents for HE4K-DCK-RPS

Reviews:

Related manuals for HE4K-DCK-RPS

Brands by name

Popular brands