DOC-USR-0112-02
___________________________________________________________________________________________
34
File Prefix
(Aux TS File Only)
MOV1_%F_%T
Textbox to set file name prefix for recorded .ts file.
The prefix will be followed by a number starting at
zero and auto-incremented if an existing file with the
same prefix is detected on the USB storage device.
Max File Size
(Aux TS File Only)
1024M
Textbox for entering the maximum size of the
recorded TS file.
Video PID
*
(TSRTP Only)
0 – 8191 (
221
)
PID assigned to video in the TS stream.
PCR PID
*
(TSRTP Only)
0 – 8191 (
521
)
PID assigned to PCR in the TS stream.
PCR Interval
*
(TSRTP Only)
(50)
PCR transmission interval in milliseconds.
PMT PID
*
(TSRTP Only)
0 – 8191 (
31
)
PID assigned to PMT in the TS stream.
Video Max Delay
(TSRTP Only)
(300)
Sets encoder maximum video delay in milliseconds.
TS Rate
(TSRTP Only)
125K – 20000K (
5000K
) The rate of the transport stream. Normally, this value
should be set to 1.25 * (video b audio bitrate).
This can be set to higher values to allow leeway for
times when many bits are needed to encode. This can
be especially useful for ensuring smooth playback at
lower bitrates.
TS Lowlat Mode
*
(TSRTP Only)
True
False
Turning “Lowlat Mode” on causes the TS muxer to
instead send packets out as soon as it receives them
rather than buffering them. This results in lower
latency at the expense of decreased network
efficiency and a less smooth bitstream. There is a
limit of 5Mbps for TS Lowlat Mode.
FEC Enable
(TSRTP Only)
True
False
Enables Pro-MPEG forward error correction (FEC) on
the encoded stream.
FEC Columns (L)
(TSRTP Only)
5
Allows for setting the number of FEC columns. The
number of columns multiplied by the number of rows
must be less than or equal to 100.
FEC Rows (W)
(TSRTP Only)
1
Allows for setting the number of FEC rows. The
number of columns multiplied by the number of rows
