BLD265-SC2 User Guide
DOC-USR-0219-03
______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
12
7.0
DISPLAY SETUP
On the System Setup tab, the “Display Setup” section controls the display outputs and their display
resolutions.
When “Display Output” is set to “dual” (default setting), the Resolution setting corresponds to SDI/CVBS
output #1, and 2
nd
Resolution is SDI/CVBS output #2.
The CH1 tab specifies the decode settings for SDI/CVBS output #1.
The CH2 tab specifies the decode settings for SDI/CVBS output #2.
The CVBS output is only active in “ntsc” mode.
When “Display Output” is set to “single”, the “Resolution” setting corresponds to SDI/CVBS output #2,
decoder settings are from CH1 tab, and CH2 tab is not used.
To change display resolutions, select the new resolutions in the “Resolution” and “2
nd
Resolution” drop-
downs, then hit the “Set Display” buttons.
Figure 5 Display Setup
