TM
Z-Extender ZXT-120
(Z-Wave-to-AC IR Extender)
Introduction
The ZXT-120 is a Z-Wave to IR extender for air-conditioner (AC), (Figure 1), it works with
any Z-Wave compliant gateway or controller by translating Z-Wave Thermostat
Commands to AC IR control code. User can select the IR code from the built-in code
library of ZXT-120, or use learning function, by using Z-Wave Configuration Commands
according to the parameter table. ZXT-120 is also with built-in temperature sensor which
allows gateway or controller to get the current room temperature.
ZXT-120 can be configured as either "
Frequently Listening Routing Slaves
" FLiRS (if
you are using battery) or "
Always Listening
" (if you are using 5Vdc adaptor) before
inclusion process. Refer to Glossary for definition of "FLiRS" and "Always Listening"
mode.
ZXT-120 supports Network Wide Inclusion (NWI) and Explore Frames. It also supports Z-
]Wave networks with multiple gateways and controllers. Once the configuration and setup
is complete, the gateway or controller can use Z-Wave "Thermostat commands class" to
control their IR-controlled air-conditioner through the ZXT-120.
2
Figure 1 ZXT-120