DCN: 140-01773-01
Page 2
INSTALLATION
HVAC System Setup
The thermostat requires that you setup the type and configuration of your HVAC system for
proper operation. This is done in the
Thermostat Info
screen
Setup
button or the
Installer
Settings
screen on the thermostat. The
Installer Settings
is a hidden screen. To access it,
press the main menu button and when the main menu screen appears, press and hold the
middle two buttons for 5 seconds.
Thermostat Main Menu
Installer Settings screen
Installer Settings
Before operating the system, you must configure the thermostat for the correct HVAC
system type. You will need to know the following information to correctly configure the
thermostat. The HVAC setup is in the
Mechanical Settings
menu screen.
HVAC system type:
What type HVAC system do you have? Standard or Heat pump
For Standard systems:
Fan Type: Do you have Gas heat or Electric heat?
For Heat Pump systems:
Change over valve (or reversing valve) type: Does your system
change over with cooling operation or with heating operation? Check your existing
Press and hold two middle buttons to enter the Installer Settings screen
75
Done
Select
Display Lock N
Service Mode
System Settings
Max Heat SP 90
Installer Settings
+
_
75
Done
Select
User Settings
Away Setpoints
ZWave Install
Thermostat Info
Menu Selection
