A. Remove the screws on the left and right sides of the panel
B. Use two removal holes to remove the panel
C. Remove the screw cover
D. Install the PSK01 body to the WALL BOX and lock the screws.
E. Install the screw cover back
F. Install the outer frame. When installing, pay attention to the
parallel connection between the panel and the body to prevent
the O-ring from coming out.
G. Lock back panel screws
Tamper Switch
If the tamper switch be released, the device will send the alarm
report.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used battery according to the instructions.
Choosing a Suitable Location
1. Do not locate the Module facing direct sunlight, humid or dusty
place.
2. The suitable ambient temperature for the Module is 0°C~40°C.
3. Do not locate the Module where exists combustible
substances or any source of heat, e.g. fires, radiators, boiler etc.
Disposal
9
