4
For group 1, the Switch will report ON/OFF status of Relay to controller.
2-1 Auto report to Grouping 1 (Maximum Node 1)
2-1-1 On/Off Event Report
When “on” or “off” state has been changed (ex. Press S1 S2 or include on/off
button), it will send Binary Switch Report to the nodes of Group1.
Binary Switch Report
ON:[Command Class Switch Binary, Switch Binary Report, Value
=(255)0xFF]
OFF:[Command Class Switch Binary, Switch Binary Report, Value
=0(0x00)]
2-1-2 Overload alarm report command
When PAN05 detect the overload, it will send Alarm Report to the node of
Group1.
The content of Alarm Report
Alarm report command:[Command Class Alarm, Alarm Report, Alarm Type
= 0x08, Alarm Level = 0xFF]
2. Z-Wave’s Configuration
Configuration
Parameter
Function
Size
(Byte)
Value
Unit
Default Description
1
Edge or
Pulse
mode or
Edge-Tog
gle mode
1
1-3
1
1
：
Edge mode
2
：
Pulse mode
3
：
Edge-Toggle
mode
2
Restore
switch
state
mode
1
0-2
1
0 : Switch Off
1 : Last Switch
State
2 : Switch On
3
Manual
On/Off
mode
1
0-1
1
0
：
Disable
manual On/Off
1
：
Enable
manual On/Off
4
LED
indication
mode
1
1-3
1
1
：
Show switch
state
2
：
Show night
mode
3 : One flash
mode
5
Auto off
timer
1
0-0x7F
FF
Second
0
0
：
Disable auto
off function
1-0x7FFF
：
1 ~
32767seconds
6
RF Off
command
mode
1
0-3
0
0
：
Switch off
1
：
Ignore
2
：
Switch toggle
3
：
Switch on
3-1 Edge / Pulse / Edge-Toggle mode
Manual switch S1 and S2 can set to Edge mode or Pulse mode or Edge-Toggle
mode, default value is Edge mode.
3-1-1 Edge mode: this mode is suitable for the bi stable wall switch that has indicator
point on the switch, and the same position correspond to same state of relay1.
if the PAN05 relay change the state because of receiving Z-Wave RF
command, it may need two times of change (switch on to off or switch off to on)
to let relay back to the correspond state. Manual switch S2 is disabled in
this mode.
3-1-2 Pulse mode: this mode is suitable for the toggle type wall switch to swap the
state of Relay1.
3-1-3 Edge-Toggle mode: this mode is suitable for the normal bi-stable switch, every
time when change the state of the wall switch will also swap the state of
Relay1.
3-2 Restore Switch State Mode
