6
4. Door sensor report time
4.1 Door sensor auto report status time setting
The minimum time is 1 hour, as setting is 12, means 1*12h (12 hours), if set as t, means 1*t h (t hours)
Function
Parameter
Size
Range
Default
Auto report battery
status time
5
1
0-24 hours
6
hours
VII. Z-Wave door sensor commands
1. Generic Deice Type = GENERIC_TYPE_SENSOR_BINARY
2. Specific Device Type = SPECIFIC_TYPE_ROUTING_SENSOR_BINARY
3. Support Command Class =
4.
COMMAND_CLASS_ASSOCIATION_V2,
5.
COMMAND_CLASS_WAKE_UP_V2,
6.
COMMAND_CLASS_BATTERY,
7.
COMMAND_CLASS_SENSOR_BINARY_V2,
8.
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2,
9.
COMMAND_CLASS_VERSION_V2,
10.
COMMAND_CLASS_BASIC,
Ⅷ
. Limitations
Please be certain that our product is reliable. However, its transmission capacity and installing condition will make the
detector limited in a certain range. Here are some possible situations:
1.
Indoor environmental limit, as the interference from same RF frequency, and complicate geographical
environment, etc.
2.
Low battery of the detector
Note: Please understand the company has no obligation for the effect results from customer’s incorrect operation.
