Page.14 of 17
7/24/2014
II.
Add / Remove The Device
1.
Add The Device
step 1.
Click "Settings" and then click "Add / Remove Device", "add device" or
"Remove Device"
step 2.
In this case, manual operation of the Z-Wave device linkages
step 3.
Successful there will be "new device, the operation was successful", your
device will add better.
step 4.
Then click "device", can be used.
Step 1 Click on Settings, Add / Remove devices and add settings
Step 2 Press the
connection button
Step 3
To add a device
successfully
Step 4
Operable device
