4
INSTALLATION GUIDELINES
•
Connect the ethernet cable to the connector
Ethernet 1
•
Connect the 9–48V power supply to the terminals
GND and V+
•
Turn on the switch on the lid
•
Wait for the controller to load, the indicator will
flash green
•
Go to
to find out the IP
address of the controller in your local network.
•
Also, you can view the IP address of the controller
on the router
•
In local network go to the controller address
•
When you first log in, set the administrator
password and email
•
It is recommended to change the SSH access
credentials.
•
By default login: root, password: wirenboard.
To change it connect via SSH, enter the passwd
command and enter the new password twice.
KNX, Z-WAVE, ZIGBEE
The controller supports simultaneous operation
in wireless Z-Wave and Zigbee networks and wired
KNX network. This allows you to combine different
automation technologies and benefit from a large
number of different devices available for your smart
home project.
KNX
is designed for installation in large houses due
to the reliability of the wired connection.
Z-Wave
allows retrofit installations as well as
extending KNX installations with high-quality and
functional devices.
Zigbee
opens the door to a broad range
of inexpensive devices.
Summary of Contents for WIREN BOARD 7
Page 5: ...5...
