Z-Tec Mobility
Unit 1B, Albion Works, Moor Street, Brierley Hill, West Midlands, DY5 3SZ
6. Transportation
To fold the Tri-Walker for trans-
portation, unhook the basket and
pull the middle locking bar
upwards, the Tri-Walker is then
ready for transport.
(Oct.10/1)
7. Maintenance
•
Ensure the Tri-Walker is used only as an aid for mobility
•
Ensure the Tri-Walker is kept clean. Wipe down with a damp cloth on a monthly basis.
•
Check the moving parts (e.g. wheels & height adjustment) monthly.
•
Ensure that the brakes are working correctly.
•
All the fasteners (screws, nuts & bolts) are to be checked monthly to ensure they are
securely tightened.
•
Check that the front castor wheel swivels freely. Withdraw from use if it does not work.
•
Only use an approved Z-Tec dealer for any maintenance & repairs on your 3 wheel TRI-
Walker.
8. Warranty
To improve the safety & lifespan of your Tri-Walker, it is recommended that you have it serviced on a annual
basis by an authorised dealer. Z-Tec Tri-Walkers are guaranteed for 12 months from the date of purchase, this
warranty is not transferable. Should any part of the walker require repair or full or part replacement, as a
result of a manufacturing or material defect within the warranty period, parts will be supplied free of charge. The
guarantee excludes tyres & all items that have been subjected to undue wear & misuse. Under normal circum-
stances, no responsibility will be accepted where the walker has not been maintained in accordance with the
manufactures recommendations. This does not affect your statutory rights.
If any other issues arise that are not mentioned in this user manual please write to the address below.
Disposal
—Contact your local authority to dispose of the Tri-Walker when no longer required.
The braking system will periodically require adjustment. To do this
release the locking nut & screw out the cable adjuster until the brake
arm clears the wheel by approx. 2mm. Retighten locking nut & re-
peat on other brake mechanism. With both wheels off the ground &
the brakes disengaged check that they spin freely & do not rub the
brake arm.
BRAKE ARM
CABLE ADJUSTER
LOCKING
NUT
2mm
