Z-Tec ZT-TRI-WLK-RED, User Manual

Page: 3 / 4

4. Assembling the Tri-Walker
NOTE: The brakes are factory set & may not require initial adjustment. For technical assistance
on the brakes, contact your local Z-Tec dealer.
1. Remove all packaging from the Tri-Walker.
2. Fold out the Tri-Walker by pulling the rear wheels apart so the
walker looks like the photograph in the Parts Description. Then
push down the bar in the middle to lock the walker open (situated
at the front centre).
3. Insert the handles as
shown by A until the re-
quired height of the handles
is reached, put the bolt
through the hole from the
inside & locate the head of
the bolt in the hexagonal
recess in the inside of down
tube B, add the curved
washer on to the bolt pro-
truding through the outside
of the down tube, then lo-
cate the black star knob see
C & securely fasten turning
the knob clock wise.
2.
3.
4. The shopping bag is secured
by putting the flaps around the
four tubes of the Tri-Walker &
then using the press-studs to hold
it in place.
The basket is hooked on the
hooks situated on the front at the
same height as the star knobs on
the Tri-Walker handles.
3.
5. Brake Operation & Brake Maintenance
To operate the locking arthritic loop brakes
1.
Squeeze the brake lever up to engage the brake (E in the up-
wards direction as shown in the photo).
2. To lock the brakes, push down on the brake lever until it
locks (F downwards arrow).
3. To unlock the brakes, pull up on brake lever until
the lock disengages (see upwards arrow marked as
G).
E.
F.
G.
A.
B.
C.
2.